Back

Download Brochure

Download Driver

Applications: distribution, inventory management, supplychain management
 

• Fully integrated ThingMagic UHF RFID
  Reader/Encoder (NA only)
• Available in right and left hand configurations,
  DT & TT
• Available in 203dpi (8 dots/mm) or
  300dpi (12 dots/mm)
• Embedded ZebraLink WebView and Alert features (requires an optional ZebraNet® Print Server)
• Real Time Clock
• Applicator interface provides error status and control signals for applicators
• Communications via serial RS-232/422/485 and IEEE 1284 bidirectional parallel interface with auto detect
• Full function front panel and multilingual back-lit LCD display with user programmable password protection
• Thin film print head with E3® Element Energy Control
• Dual media sensors, transmissive and reflective, selectable through software or front panel
• ZPL® or ZPL II® programming language, selectable through software or front panel
• Fast 32 bit 133 MHz RISC processor
• 10MB RAM memory
• Flash memory including 2MB non-volatile memory storage for downloadable objects
• Type I & II Series
• XML-enabled printing

Resolution

203 dpi (8 dots/mm)
300 dpi (12 dots/mm)

Memory

• 10MB RAM memory
• Flash memory including 2MB non-volatile memory storage for downloadable objects

Print width

4.1" (104 mm)

Print length

• Maximum non-continuous media print length (203 and 300 dpi):10 MB memory = 39"/990 mm
• Maximum continuous media print length (203 dpi): 10MB memory = 150"/3810 mm
• Maximum continuous media print length (300 dpi): 10MB memory = 100"/2540 mm

Print speed

12" (305 mm)/sec
8" (203 mm)/sec

Media sensors

Reflective
Transmissive

Maximum label and liner width

625" (16 mm) to 4.5" (114 mm)

Maximum label and liner length

Minimum Standard Media label length: *
-Applicator mode: 0.50"/12.7 mm; 0.50"/12.7 mm with backfeed off
-Rewind mode: 0.25"/6.4 mm
-Tear-off mode: 0.50"/12.7 mm; 0.25"/6 mm with backfeed off
* Media registration and minimum label length are affected by media type and width, ribbon type, and print speed. Performance improves as these factors are optimized. Zebra recommends always qualifying any application with thorough testing.
* Smaller labels may be printed subject to qualifying and characterizing the media and application with thorough testing.

Core diameter

1.0" (25.4 mm) I.D.

Media thickness

0.0058" (0.148 mm) to 0.010" (0.254 mm)

Media types

continuous, die-cut, black mark

Outside diameter

4" (101.6 mm)

Standard length

2,955' (900 m)

Ribbon width

1.0" (25 mm) to 4.2251" (107 mm)

Ribbon setup

Ribbon wound coated side out

ID Core

1" (25.4 mm)